Category: News

August 16, 2016 – August 16, 2026

Ten years.

It sounds simple when written down, but looking back, it is difficult to fit everything that happened during those ten years into just a few paragraphs.

AGS Custom started in 2016 with a simple idea: to build products that we, as shooters, would actually want to use ourselves.

There was no grand corporate plan behind it. No large team, no investors, and no established international distribution network. Just an idea, a workshop, a lot of testing, and the belief that good shooting equipment did not have to be unnecessarily complicated or expensive.

What started in Serbia gradually found its way onto shooting benches around the world.

From an Idea to a Product

Like most products designed by shooters, our early designs came from trying to solve practical problems.

We built things, tested them, changed them, sometimes discarded them completely, and started again.

That philosophy eventually became one of the foundations of AGS Custom:

Keep it simple. Make it reliable. Make it work.

Over the years, our products evolved significantly. Designs changed. Manufacturing improved. New versions were introduced. Customer feedback showed us things that we could never have discovered on our own.

But one principle remained unchanged.

We wanted to build equipment that we would be comfortable putting on our own reloading bench.

The AGS Annealer

One product eventually became particularly important to our story: the AGS Brass Annealer.

The concept was straightforward — create a compact, robust and affordable annealing machine that could provide reloaders with a consistent and repeatable process without unnecessary complexity.

That original concept has continued to evolve.

Generation after generation brought improvements in mechanics, electronics, usability and caliber capability.

Today, the AGS Annealer platform covers cartridges all the way up to .50 BMG, while features such as our dual-torch configuration allow shooters to significantly reduce processing time.

And in 2026 we introduced another major step forward: the AGS Annealer V3.3 PRO, designed for automatic case-feeder integration.

What started as a relatively simple machine has become an entire product platform.

But its basic purpose remains exactly the same:

Spend less time processing brass and more time shooting.

From Serbia to the World

Perhaps one of the most rewarding parts of the last ten years is seeing how far AGS has travelled from where it started.

What began as a small Serbian company gradually reached shooters across Europe, North America and other parts of the world.

The United States became an especially important part of that growth. Over the years, more and more AGS machines found their way onto American reloading benches, and the U.S. grew into one of our key markets.

In 2025, we established AGS Custom LLC in Wyoming, marking another important step in our long-term commitment to the U.S. market and creating a foundation for further growth there.

At the same time, we continued developing relationships with dealers and customers across Europe and beyond.

Thousands of machines have left our workshop over the years and ended up on reloading benches belonging to recreational shooters, competitors and serious precision-rifle enthusiasts around the world.

For a company that started from a small workshop in Serbia, that still means something to us.

A lot.

Built Around Shooting

There is another part of AGS that has always been important.

We don’t simply manufacture shooting equipment.

We shoot.

We reload our own ammunition. We test equipment on the range. We compete. We make mistakes, change loads, chase consistency and occasionally spend far too much time trying to understand what happened to a group.

In 2026, that journey even took us to Bisley and the F-Class World Championships.

Experiences like that continually remind us who we are building our products for.

Because ultimately, we are those people too.

That is why the words we have used for years still describe AGS better than any corporate slogan could:

From shooter, for shooters.

Ten Years of Customers

None of this would exist without the people who decided to trust a relatively unknown company from Serbia.

Especially those who did it in the early years.

Every customer who bought a machine, recommended AGS to another shooter, sent us feedback, posted a photo, made a video, wrote a review or simply contacted us with an idea became a small part of this story.

Some of the best improvements we have made over the years started with a customer asking:

“Have you ever thought about doing it this way?”

Sometimes we had.

Sometimes we hadn’t.

And sometimes that question eventually became a new product.

For that, we are genuinely grateful.

The Next Ten

Ten years is an important milestone.

But we don’t see it as a finish line.

If anything, 2026 feels more like the beginning of AGS’s next chapter.

We are developing new products, expanding our capabilities, strengthening our presence in key markets and continuing to improve the products that brought us here.

There are still plenty of ideas sitting on our desks.

Some will probably never leave the prototype stage.

Others may become the products we will be writing about when AGS turns twenty.

That’s part of the process.

For now, we simply want to say:

Thank you.

To everyone who bought an AGS product.

To our dealers and partners.

To the shooters who recommended us.

To those who criticized something and pushed us to improve it.

And to everyone who has followed this journey during the last ten years.

You helped turn a small idea from Serbia into something we could hardly have imagined in 2016.

The first ten years were quite a ride.

Now let’s see what we can build in the next ten.

— AGS Custom

From shooter, for shooters.