AGS Brass Annealer 3.1

(2 customer reviews)

US $ 299.00

AGS Brass Case Annealer 3.1 – for multiple calibers, with digital PWM controller (from 2.5 to 10 seconds) and interchangeable inserts, and taller than previous two versions. Four sets of inserts are included – one set is for .223 and alike cases (with .402″ – 10.2 mm opening), one set is for .308 and alike cases (with .492″ – 12.5 mm opening), one set is for cases with .532 base and alike (with .543″ – 13.8 mm opening) and one set is for .338 and alike (with .622″ – 15.8 mm opening). Use without inserts for .408 Cheytac and similar (.661″ – 16.8 mm opening).

Torch holder accepts 1/2” diameter torches, and its adjustable for height. Annealer base is pre-drilled for those that want and need second torch holder. It also comes with sharpie holder for those who want to mark their brass (0.421″ opening).

Cases are rotated on heating station with separate motor for even heat spread during the annealing process.

Power charger included – 12V DC 2A – which comes with multi (US/UK/EU) wall plugs.

Compact size, 6×6”, and approximately 4.3″ tall.

What’s included in the package:
1x AGS Annealer 3.1
1x Wall Charger 12V 2A with EU/US/UK interchangeable plug
1X Inserts set with .402” – 10.2 mm opening
1x Inserts set with .492” – 12.5 mm opening
1x Inserts set with .543” – 13.8 mm opening
1x Inserts set with .622″ – 15.8 mm opening
1x Torch holder that accepts 1/2” diameter torch heads
1x Sharpie holder with 0.421″ opening

Worldwide shipping with fully trackable service is included in the price. Shipping is FREE.

Current turnaround time is up to 3 days, but we usually ship out the next business day.

Important – we strongly advise you to set up timing and flame every time when you anneal with Tempilaq for proper and consistent results, unless you have regulated burner/s.

PWM controller comes preset for usage, there is no need to adjust it in “MENU” section. User manual is digital and its on the lower part of this page.

In stock (can be backordered)

Add: Second Torch Holder?

Product price:US $ 299.00
Total options:
Order total:


Download User Manual

2 reviews for AGS Brass Annealer 3.1

  1. Ken Hutchinson

    I love this annealer, it’s small footprint, and it’s ability to facilitate a large variety of brass. I used my unit a few times, but it had an occasional issue with the rotating disc. I messaged Stefan and got a prompt response. He advised me of a tweek i could make, and that resolved the issue. Really supports his customers.
    I convert 223 brass to 22tcm (because this caseing isn’t available in canada). When manually annealing i would destroy about 1 out of 5 brass due to the inconsistent annealing. Using the AGS annealer I only loose 1 out of every 15 cases. I kick myself for not getting one sooner.

  2. Ron Sorrentino

    Like Ken says in his review; it has a small footprint yet it does and can handle a large batch and a wide variety of brass sizes.

    Don’t let the price deter you. These annealers are at a very competitive price point especially for what all you get compared to others out there. These annealers are all very well made and they come with, should you need it, an excellent customer care that stands by their products.

    I highly recommend and every time a conversation about annealing comes up, I direct people to AGS Custom and their annealers. You can’t go wrong.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…